5 thoughts on “What should I do if I can't get it on my hand and can't get it on my hand”
Tasha
How to remove the ring on the fingers: 1, rotate This gently put your index finger on the ring, put your thumb underneath, start gently back and forth to the ring, while slowly slowly put the rotation of the ring, while slowly slowly put the rotation of the ring. The ring is pulled out. Don't use it too hard or pull the ring, otherwise it will make your hands more swollen and the ring will be more difficult to take out. 2. Use lubricant This skin care household items can be used as lubricating oil, allowing you to remove the ring without any damage (the cleaner with the basic ingredients contains the best effect), if your skin is your skin), if your skin is your skin) Damaged, we must choose lubricating oil wisely and increase the dose to the joints on the hand. After applying it, turn around the ring and put some lubricants below. Rotate back and forth on your fingers a few times, gently pulling the ring from your fingers. 3, cold water The ring is relaxed than during the hot day. Put your hand in cold water (but not frozen water), soak for a few minutes of ring to take out. The expansion information: The maintenance of the ring: 1. Avoid wearing a variety of jewelry, so as not to cause deformation due to collisions, and even cause scratch. 2, avoid contact with water vapor and chemicals as much as possible to prevent chemical reactions from occurring. 3. Every night, you need to pilites the ring and clean it with a cotton swab to prevent sweat from the residue and dry the dry place. 4. If you accidentally cause the silver ring to turn black, you can use silver cloth to wipe slightly, or you can soak in cola, or clean it with toothpaste. Finally, remember to dry it. Reference information: Phoenix.com-how to remove the ring card on your hand
There are five ways to take out the rings of the card owner. See which one is suitable for you. 1. Put your index finger on the ring and put your thumbs underneath. Start gently back and forth rotation ring, and slowly pull out the ring. Be careful not to pull the ring too hard or pull the ring. Otherwise, it will make your hands more swollen and make the ring more difficult to remove. 2. Use lubricant. Many skincare home supplies can be used to act as lubricating oil, allowing you to remove the ring without any loss. Some basic ingredients (such as stoning Jie) with ammonia containing ammonia are usually the best. If your skin is damaged or scratched, you must choose your lubricant wisely. Otherwise, try the following to increase the dose to the joints on the hand. VEV This or other window cleaner (Professional jewelry shops usually use this, read the instructions on the bottle before use to ensure that it is harmless to the skin) This cream -the best effect of hand cream Tereidal — if possible Fortis/shampoo r VEV oil or antibiotics (If the skin is damaged, this is the best choice) The edible injection, soft butter, or edible oil butter (lard) Intersection Intersection (Maybe there will be a little sticky but can effectively take off the ring.) This soapy water Bail oil ring relaxant 3, raise your hand. If you still can't remove your ring, try to raise your hand for a few minutes higher than your shoulders. 4, soak your hand in cold water. Have you found that your ring is relaxed than on the hot day when it is cold? Put your hand in cold water, but not cold water, and soak for a few minutes. You don't need to soak your hand to pain. 5. Putting one end of the dental floss into the ring. If you need it, you can use a needle to strike the dental floss into the ring. This with a dental floss to circulate your fingers and have been wrapped in your joints. Witched, but don't paint your fingers or make your fingers blue -purple. If it is too tight, let go. Colon the dental floss and start disassembling from the root of the finger. When you start the tooth removal from the root, your ring will continue to move forward, and soon you can remove it. If the ring is pulled out a little bit: repeat the first two steps in the current part. 6. Clean up the place where wearing a ring and those damaged places. Do not wear the ring before your hand recovered or before swelling. This tips:
If your ring is stuck due to joint skin folds, use your thumb and middle finger to hold the ring, and then use your index finger to tighten the joints of the joints of the joint. Skin, so that the skin will be under the ring. Let the ring slide through the joints of the joint skin. It, if you do everything you can use, you still can't remove the ring, take a metal gangster, and start to open the ring of the ring. This may take some time, but when the ring has a gap, you can stretch another and take down the ring.
Pay content for time limit to check for freenAnswer 1 Lubricant uses soapy water or hand -toilet lubricant and soak at the joint and ring to allow the lubricant to be fully exposed. Slowly rotate.nI tried it if I askednAnswer 2 The cold water method can raise your hand for 10 minutes to eliminate the swelling of your fingers to a certain extent, then put your fingers into cold water, and use the method of hot swelling and contraction.n3 The threading method can be wrapped in the fingers with a line, pulling the line through the other end of the ring, letting the ring rotate, and letting it slidenIt's really not possible, don't try it yourself! You can take it out in a special jewelry store!nCan you try questions?nHave you tried these methods?nThere are many ways you try now, which has caused pain in your joints. You can try not to wait for pain!nIf you ask questions, you can't get it.nAnswer you try in the simplest way! Apply it with detergent at the ring and the joint, and then rotate the ring slowly to let the fingers and rings lubricate to a certain situation. Try it, but it may be a little painful, which can help friends! But don't pull!nDo not need to do it deliberately, just rotate slowly, do n’t pay special attention to get out, and the meat that turns to the joint will run on the other side.nMore 9nBleak
Step 1: First of all, prepare a line similar to such a thread. The thin and strong Step 2: Then use a small tool to pass the line through the ring, such as a back -shaped needle, or the small iron wire first. Three steps: Then wrap this line on the outside tightly on the fingers, and keep it on the joint of the finger Step 4: Finally, straighten your fingers, and slowly circulate the line inside. Drag the circle outward This rings slowly followed the line
1 Put your hands and open it, try to keep the joints in a state of not nervous, rotate slowly, and push the ring. The many times in fact the ring is taken down. After all, you can definitely take it up when you wear it. Try it with this method first, o (∩_∩) o haha ~ 2 Apply on your fingers on your fingers on your fingers Soap The should be wiped on the part of the ring as much as possible to reduce local friction, then slowly rotate and remove the ring. 3 Apply a hand cream on the palm of the hand, or wipe the coloring oil at the local In fact, it is similar to Step 2. For the ring, try more lubricating things ~ 4 Take a few laundry powder, soak it into a liquid, then put it in a plastic bag and then stuck the plastic bag in the middle of the ring and finger Essence Because of the plastic bag, it will not hurt with brute force. 5 Soak your fingers in ice water The many times that you can't pick it up because of your hand ~ swollen ~, especially in summer, the limbs are easily swollen. At this time, as long as it is swollen, everything is good. You can soak your hands with ice water to solve this problem. 6 If the fingers are swollen, lift your hand high The cases of poor local blood will be better. At this time, go to the doctor, or find a firefighter to cut the ring. The choice of the ring often has important life significance. Therefore, when you buy a ring, you must buy the number of numbers to avoid causing regret. 7 to 119 help you or play 120 ...
How to remove the ring on the fingers:
1, rotate
This gently put your index finger on the ring, put your thumb underneath, start gently back and forth to the ring, while slowly slowly put the rotation of the ring, while slowly slowly put the rotation of the ring. The ring is pulled out. Don't use it too hard or pull the ring, otherwise it will make your hands more swollen and the ring will be more difficult to take out.
2. Use lubricant
This skin care household items can be used as lubricating oil, allowing you to remove the ring without any damage (the cleaner with the basic ingredients contains the best effect), if your skin is your skin), if your skin is your skin) Damaged, we must choose lubricating oil wisely and increase the dose to the joints on the hand. After applying it, turn around the ring and put some lubricants below. Rotate back and forth on your fingers a few times, gently pulling the ring from your fingers.
3, cold water
The ring is relaxed than during the hot day. Put your hand in cold water (but not frozen water), soak for a few minutes of ring to take out.
The expansion information:
The maintenance of the ring:
1. Avoid wearing a variety of jewelry, so as not to cause deformation due to collisions, and even cause scratch.
2, avoid contact with water vapor and chemicals as much as possible to prevent chemical reactions from occurring.
3. Every night, you need to pilites the ring and clean it with a cotton swab to prevent sweat from the residue and dry the dry place.
4. If you accidentally cause the silver ring to turn black, you can use silver cloth to wipe slightly, or you can soak in cola, or clean it with toothpaste. Finally, remember to dry it.
Reference information: Phoenix.com-how to remove the ring card on your hand
There are five ways to take out the rings of the card owner. See which one is suitable for you.
1. Put your index finger on the ring and put your thumbs underneath. Start gently back and forth rotation ring, and slowly pull out the ring. Be careful not to pull the ring too hard or pull the ring. Otherwise, it will make your hands more swollen and make the ring more difficult to remove.
2. Use lubricant. Many skincare home supplies can be used to act as lubricating oil, allowing you to remove the ring without any loss. Some basic ingredients (such as stoning Jie) with ammonia containing ammonia are usually the best. If your skin is damaged or scratched, you must choose your lubricant wisely. Otherwise, try the following to increase the dose to the joints on the hand.
VEV
This or other window cleaner
(Professional jewelry shops usually use this, read the instructions on the bottle before use to ensure that it is harmless to the skin)
This cream -the best effect of hand cream
Tereidal — if possible
Fortis/shampoo r
VEV oil or antibiotics
(If the skin is damaged, this is the best choice)
The edible injection, soft butter, or edible oil
butter (lard)
Intersection Intersection (Maybe there will be a little sticky but can effectively take off the ring.)
This soapy water
Bail oil
ring relaxant
3, raise your hand. If you still can't remove your ring, try to raise your hand for a few minutes higher than your shoulders.
4, soak your hand in cold water. Have you found that your ring is relaxed than on the hot day when it is cold? Put your hand in cold water, but not cold water, and soak for a few minutes. You don't need to soak your hand to pain.
5. Putting one end of the dental floss into the ring. If you need it, you can use a needle to strike the dental floss into the ring.
This with a dental floss to circulate your fingers and have been wrapped in your joints. Witched, but don't paint your fingers or make your fingers blue -purple. If it is too tight, let go.
Colon the dental floss and start disassembling from the root of the finger. When you start the tooth removal from the root, your ring will continue to move forward, and soon you can remove it.
If the ring is pulled out a little bit: repeat the first two steps in the current part.
6. Clean up the place where wearing a ring and those damaged places. Do not wear the ring before your hand recovered or before swelling.
This tips:
If your ring is stuck due to joint skin folds, use your thumb and middle finger to hold the ring, and then use your index finger to tighten the joints of the joints of the joint. Skin, so that the skin will be under the ring. Let the ring slide through the joints of the joint skin.
It, if you do everything you can use, you still can't remove the ring, take a metal gangster, and start to open the ring of the ring. This may take some time, but when the ring has a gap, you can stretch another and take down the ring.
Pay content for time limit to check for freenAnswer 1 Lubricant uses soapy water or hand -toilet lubricant and soak at the joint and ring to allow the lubricant to be fully exposed. Slowly rotate.nI tried it if I askednAnswer 2 The cold water method can raise your hand for 10 minutes to eliminate the swelling of your fingers to a certain extent, then put your fingers into cold water, and use the method of hot swelling and contraction.n3 The threading method can be wrapped in the fingers with a line, pulling the line through the other end of the ring, letting the ring rotate, and letting it slidenIt's really not possible, don't try it yourself! You can take it out in a special jewelry store!nCan you try questions?nHave you tried these methods?nThere are many ways you try now, which has caused pain in your joints. You can try not to wait for pain!nIf you ask questions, you can't get it.nAnswer you try in the simplest way! Apply it with detergent at the ring and the joint, and then rotate the ring slowly to let the fingers and rings lubricate to a certain situation. Try it, but it may be a little painful, which can help friends! But don't pull!nDo not need to do it deliberately, just rotate slowly, do n’t pay special attention to get out, and the meat that turns to the joint will run on the other side.nMore 9nBleak
Step 1: First of all, prepare a line similar to such a thread. The thin and strong
Step 2: Then use a small tool to pass the line through the ring, such as a back -shaped needle, or the small iron wire
first. Three steps: Then wrap this line on the outside tightly on the fingers, and keep it on the joint of the finger
Step 4: Finally, straighten your fingers, and slowly circulate the line inside. Drag the circle outward
This rings slowly followed the line
1 Put your hands and open it, try to keep the joints in a state of not nervous, rotate slowly, and push the ring.
The many times in fact the ring is taken down. After all, you can definitely take it up when you wear it. Try it with this method first, o (∩_∩) o haha ~
2 Apply on your fingers on your fingers on your fingers Soap
The should be wiped on the part of the ring as much as possible to reduce local friction, then slowly rotate and remove the ring.
3 Apply a hand cream on the palm of the hand, or wipe the coloring oil at the local
In fact, it is similar to Step 2. For the ring, try more lubricating things ~
4 Take a few laundry powder, soak it into a liquid, then put it in a plastic bag
and then stuck the plastic bag in the middle of the ring and finger Essence Because of the plastic bag, it will not hurt with brute force.
5 Soak your fingers in ice water
The many times that you can't pick it up because of your hand ~ swollen ~, especially in summer, the limbs are easily swollen. At this time, as long as it is swollen, everything is good. You can soak your hands with ice water to solve this problem.
6 If the fingers are swollen, lift your hand high
The cases of poor local blood will be better. At this time, go to the doctor, or find a firefighter to cut the ring. The choice of the ring often has important life significance. Therefore, when you buy a ring, you must buy the number of numbers to avoid causing regret.
7 to 119 help you or play 120 ...