1 thought on “How to see how big the fingers wear a ring”

  1. Use iron wire, cotton wire or note, take the note as an example, walk around the finger part of the finger that wants to wear a diamond ring to ensure that the size of the circle is moderate, then make a small mark, and then start the circle into a line to measure its length. , To get the perimeter of the required ring. Then compare the ring size below. The cotton line measurement is easy to cause errors, and the measuring metering is basically accurate.
    2

    3
    Tips: Please do not directly along the root volume of the finger during measurement. Because the joints are generally thicker than that of the joint, the root volume of the light edge will be smaller.

    If Note
    The difference between the two neighborhoods is only a few millimeters, and the fingers are soft. In fact, the actual effects between the adjacent numbers are not much different.
    Cofling minimum diameter: 16mm, the maximum diameter of 18mm; the minimum diameter of men's models is 17mm, and the maximum diameter is 21mm.
    The new people can measure the above method at home!

Leave a Comment